![]() Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions. CleanupĬLEANUP: Clean brushes and tools with warm, soapy water Product Warning gallon (3.78 Liters) on primed, smooth, nonporous surfaces. To Touch: 30 minutes To Recoat: 4 hours CoverageĬOVERAGE: Approximately 250 to 300 sq. Drying TimeĭRYING TIME: Dry time 77✯ (25✬) 50% relative humidity. When using more than one can of the same color, intermix to ensure color uniformity. For metal, tannin staining woods, fresh concrete or masonry (less than 30 days cure), or chalky surfaces, use of the appropriate high quality specialty primer is recommended for best results. When PPG Timeless exterior paint is applied to an uncoated substrate or to bare wood, two coats are required with the first coat acting as the primer. Sand all glossy, rough and patched surfaces. Putty all nail holes and caulk all cracks and open seams. Blistering and peeling issues are commonly caused by moisture behind the paint film. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |